APC AP7602 Instruction Manual download pdf (Page 124)

Mass Configuration: Sensor and Alert Settings

InfraStruXure Central 4.0 User’s Reference 123

created report generation entries of this type are displayed.

4. Click Add, then select one or more NetBotz devices from the device selection list and click Next.

5. A Periodic Report configuration interface window opens. This window contains the following

fields:

Field Description

Enabled Check this check box to enable periodic FTP reporting.

Include camera pictures Check this check box to include current image captures by

cameras connected to or integrated with your devices in the FTP

post.

Include maps Check this check box to include any maps that are stored on the

appliance in the FTP post.

Include graphs Check this check box to include graphs of the sensor readings

for all sensors that are associated with the appliance in the FTP

post.

Interval The frequency with which FTP reports will be generated.

Sensor priority Acts as a filter that can be used to limit the amount of sensor

data that is included with the periodic report. You can select

High, Medium, or Low priority settings:

• High: Only sensor data associated with physical sensors that

are integrated with or connected to the appliance are included

in the report. Sensor data associated with remote devices, such

as MIB II data gathered from remote targets using Basic

Device Crawlers and Advanced Data that is gathered using

add-on applications such as Advanced Device Crawlers, is not

included in the report.

• Medium: Sensor data associated with physical sensors and

with Advanced Data sensor sets from remote devices (such as

that which is gathered using Advanced Device Crawlers) is

included in the report. Data associated with remote devices

that is not grouped in an Advanced Data sensor set, such as

MIB II data gathered from remote targets using Basic Device

Crawlers, is not included in the report.

• Low: Sensor data from all sensors is included in the report.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 293 294

No comments

APC AP7602 Instruction Manual Page 124