APC AP7602 Instruction Manual download pdf (Page 82)

Server Administration Tasks

InfraStruXure Central 4.0 User’s Reference 81

– Management devices: If you are creating a Management device discovery entry, the following

controls are displayed in the Management device discovery definition window:

Field Description

IP range The range of IP addresses that will be searched periodically for

devices. An IP address range is defined by either using an

asterisk to indicate a wildcard portion of the IP address (for

example, 192.168.1.* means that you want InfraStruXure

Central to periodically check for the presence of a device on all

IP addresses between 192.168.1.1 through 192.168.1.255) or by

using a hyphenated value to define a specific range of values for

part of the IP address (for example, 192.168.1.1-20 means that

you want InfraStruXure Central to periodically check for the

presence of a device on all IP addresses between 192.168.1.1

through 192.168.1.20, while 192.168.1-20.* checks for devices

on all addresses between 192.168.1.1 through 192.168.20.255).

Note: Use asterisks as a wildcard value only for whole portions

of the IP address. Wildcard values must be used to represent the

entire range of addresses in each portion of the IP address. For

example, 192.168.1.* will work, but 192.168.1.1* will not.

Port range The TCP/IP ports that will be checked on each IP address.

SSL options Select from this drop box the selection that corresponds to the

SSL communication options that you want to apply to

communications when attempting to discover devices. You can

choose the following options:

• Do not use SSL: Do not use SSL

• Use SSL if available: Attempt to use SSL, but proceed with un-

encrypted delivery otherwise. If SSL is used, no certificate

verification is required. This is the default.

• Require SSL: No verification: Require SSL support on the

server (do not deliver without it), but accept any certificate

provided by the server (i.e. self signed certificates will be

allowed).

• Require SSL - verify certificate: Require SSL support (do not

communicate without it), and only accept certificates signed by

a trusted certificate authority (i.e. self signed certificates will

not be allowed, but Verisign and the like certificates will be

accepted even if the hostname does not match the host in the

certificate).

• Require SSL - verify certificate and hostname: Require SSL

support (do not communicate without it), and only accept

certificates signed by a trusted certificate authority and which

contain a hostname matching that used to contact the server

(i.e. only certificates issued by trusted sources and which

contain the same hostname as used to access the server are

allowed).

Enable schedule The current state of this discovery setting schedule. If this check

box is not enabled, the discovery settings are saved but

scheduled discovery functions will not occur automatically.

Instead, discovery functions will occur only when initiated by

the user.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 293 294

Comments to this Manuals

No comments

APC AP7602 Instruction Manual Page 82

Comments to this Manuals

Related products and manuals for Power supply units APC AP7602