APC AP7602 Instruction Manual download pdf (Page 215)

Mass Configuration: Device Settings

214 InfraStruXure Central 4.0 User’s Reference

The following controls and data appear in the Advanced pane:

4. Type the new values in the appropriate fields. When you are finished, click OK to save any changes

to the device. Click Cancel to close this window without saving any changes.

SNMP

Use the SNMP task to view or change the SNMP settings on selected devices. To use the SNMP task:

1. Launch the SNMP task. In addition to the IP address/hostname and status of each selected device,

the SNMP task's device selection window also includes two task-specific information columns:

– Agent Enabled: Specifies whether the device's SNMP agent has been enabled or not.

– Port: Displays the TCP port on which the agent is configured to communicate.

2. To continue, select one or more devices from the device selection window and click Edit.

3. The SNMP Configuration window opens. This window consists of two tabbed panes: The Version

1/Version 2 pane, which includes the basic SNMP configuration controls; and the Version 3 pane,

Field Description

Send debug messages to syslog When checked, debug messages will be forwarded to the syslog

host specified in the Log task (for more information see Log).

Use default SMS settings Check this check box to use the default SMS values for your

SMS-capable modem. If you need to use custom settings,

uncheck this check box and then use the Use protocol descriptor

unit check box and the Character set and Initialization

commands fields to specify customs settings.

Use protocol descriptor unit (PDU) Specifies whether the device should use Protocol Descriptor

Unit (PDU) mode or “mode” when communicating with the

modem to send the SMS message. PDU mode is preferred

because it is more versatile than text mode. Some modems do

not support both modes.

Character set Specifies the character set used when communicating with the

modem to send the SMS message.

Initialization commands The initialization string used for the modem that will be used to

send SMS messages.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 293 294

No comments

APC AP7602 Instruction Manual Page 215