APC AP7602 Instruction Manual download pdf (Page 83)

Server Administration Tasks

82 InfraStruXure Central 4.0 User’s Reference

– SNMP devices: If you are creating an SNMP device discovery entry, the following controls are

displayed in the SNMP device discovery definition window:

Days The day or days of the week on which the discovery function

will be performed.

Time The time of day at which the discovery function will be

performed.

Field Description

IP range The range of IP addresses that will be searched periodically for

SNMP devices. An IP address range is defined by either using

an asterisk to indicate a wildcard portion of the IP address (for

example, 192.168.1.* means that you want InfraStruXure

Central to periodically check for the presence of an SNMP

device on all IP addresses between 192.168.1.1 through

192.168.1.255) or by using a hyphenated value to define a

specific range of values for part of the IP address (for example,

192.168.1.1-20 means that you want InfraStruXure Central to

periodically check for the presence of an SNMP device on all IP

addresses between 192.168.1.1 through 192.168.1.20, while

192.168.1-20.* checks for devices on all addresses between

192.168.1.1 through 192.168.20.255).

Note: Use asterisks as a wildcard value only for whole portions

of the IP address. Wildcard values must be used to represent the

entire range of addresses in each portion of the IP address. For

example, 192.168.1.* will work, but 192.168.1.1* will not.

Port The TCP/IP port that will be checked on each IP address.

Timeout The number of seconds that InfraStruXure Central will wait for a

response from a target IP address before either retrying

communications or considering the target to be unresponsive.

The default value is 30 seconds.

Retries The number of times that InfraStruXure Central will retry

communications with target IP address that is not responding

before considering the IP address to be unresponsive and

moving on to the next IP address in the IP address range.

Enable schedule The current state of this discovery setting schedule. If this check

box is not enabled, the discovery settings are saved but

scheduled discovery functions will not occur automatically.

Instead, discovery functions will occur only when initiated by

the user.

Days The day or days of the week on which the discovery function

will be performed.

Time The time of day at which the discovery function will be

performed.

Version The version of SNMP that will be used to communicate with the

target. You can select version 1, 2c, or 3.

Field Description

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 293 294

Comments to this Manuals

No comments

APC AP7602 Instruction Manual Page 83

Comments to this Manuals

Related products and manuals for Power supply units APC AP7602