APC AP7602 Instruction Manual download pdf (Page 266)

Surveillance View

InfraStruXure Central 4.0 User’s Reference 265

SSL options Specify the SSL verification that is required when Surveillance-

licensed devices are communicating with the InfraStruXure

Central server.

• No verification: Require SSL support on the server (do not

deliver without it), but accept any certificate provided by the

server (i.e. self signed certificates will be allowed).

• Verify certificate: Require SSL support on the server (do not

deliver without it), and only accept certificates signed by a

trusted certificate authority (i.e. self signed certificates will not

be allowed, but Verisign and the like certificates will be

accepted even if the hostname does not match the host in the

certificate).

• Verify certificate and hostname: Require SSL support on the

server (do not deliver without it), and only accept certificates

signed by a trusted certificate authority and which contain a

hostname matching that used to contact the server (i.e. only

certificates issued by trusted sources and which contain the

same hostname as used to access the server are allowed).

Post mode Post Mode determines when the device will send Surveillance

data to the server. The default Post Mode is Send on Motion

Detected.

There are 4 Post Modes:

• Disabled: Images received from the device are not converted

into surveillance clips

• Send Continuous During Alerts: Images are captured by the

device camera and sent to InfraStruXure Central continuously

if any sensor that includes image captures as part of its Alert

Actions in an alerting state. Images are captured regardless of

whether motion is detected or not. The device will post images

until the alert condition ceases.

Note: If the alert condition goes uncorrected this post mode

can generate large amounts of picture data and could

conceivably result in heavy network loads, extensive disk

space usage and InfraStruXure Central server performance

degradation.

• Send On Motion Detected: The device will automatically

begin sending images when the camera detects motion. The

device will post images continuously until it no longer senses

motion.

• Send On Motion Detected During Alerts: The device will

begin sending images when a sensor that includes image

captures in its Alert Actions is in an alerting state and the

camera on the device detects motion. The device will send

images continuously until it no longer senses motion or until

the alert condition ceases.

Event send retry Specifies the number of seconds that the device will wait if it

receives no response when attempting to send an image to the

InfraStruXure Central device before attempting to post again.

Image capture mode Specifies the resolution of images captured from the device.

Field Description

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 293 294

Comments to this Manuals

No comments

APC AP7602 Instruction Manual Page 266

Comments to this Manuals

Related products and manuals for Power supply units APC AP7602