APC AP7602 Instruction Manual download pdf (Page 156)

Mass Configuration: Sensor and Alert Settings

InfraStruXure Central 4.0 User’s Reference 155

returned to normal. Default value is 0 (state returns to normal immediately after the measured

value is no longer violating the threshold).

– Set an Advanced Schedule for this threshold (optional). By default, all thresholds are assumed to

be enabled 24 hours a day, 7 days a week. However, you can specify that a threshold will be

enabled only during specific time ranges. To set an Advanced Schedule:

a.Click Advanced Schedule.... The Schedule Threshold window opens.

b.By default, all time periods in the schedule are set to Enabled. To disable the threshold for a

currently enabled period of time, highlight the period of time by clicking-and-dragging over the

desired time range, and then click Disable. To enable the threshold for a currently disabled

period of time, highlight the period of time by clicking-and-dragging over the desired time

range, and then click Enable.

c.When you have finished creating your threshold Enable Schedule, click OK to save the

schedule and return to the Thresholds task.

– Select an Alert Severity value for this threshold. Available Alert Severities are, in order of

escalating severity: Information, Warning, Error, Critical, or Failure. By default, the Alert

Severity generated by this threshold will be “Error.”

– Select Cameras to Trigger in response to the alert. If desired, alert notifications generated in

response to this threshold can include image captures from any Camera Pod 120s connected to

your device. To include images from one or more connected Camera Pod 120s, check the check

boxes that correspond to the desired pods.

– Specify a User-specified URL and User-specified Description. You can use these fields to include

additional user-specific information with any alert notifications that are generated using this

threshold.

– Check the Return-To-Normal Requires User Input check box. When checked, if this threshold is

exceeded the sensor will not report a Return-To-Normal state until a user with Administrator or

Application (with Alert Update) privileges opens the resulting alert entry in the Alerts View and

clicks the Mark Alert Resolved button.

7. Click OK to save this threshold.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 293 294

No comments

APC AP7602 Instruction Manual Page 156