APC AP7602 Instruction Manual download pdf (Page 154)

Mass Configuration: Sensor and Alert Settings

InfraStruXure Central 4.0 User’s Reference 153

c.When you have finished creating your threshold Enable Schedule, click OK to save the

schedule and return to the Thresholds task.

– Select an Alert Severity value for this threshold. Available Alert Severities are, in order of

escalating severity: Information, Warning, Error, Critical, or Failure. By default, the Alert

Severity generated by this threshold will be “Error.”

– Select Cameras to Trigger in response to the alert. If desired, alert notifications generated in

response to this threshold can include image captures from any Camera Pod 120s connected to

your device. To include images from one or more connected Camera Pod 120s, check the check

boxes that correspond to the desired pods.

– Specify a User-specified URL and User-specified Description. You can use these fields to include

additional user-specific information with any alert notifications that are generated using this

threshold.

– Check the Return-To-Normal Requires User Input checkbooks. When checked, if this threshold

is exceeded the sensor will not report a Return-To-Normal state until a user with Administrator or

Application (with Alert Update) privileges opens the resulting alert entry in the Alerts View and

clicks the Mark Alert Resolved button.

7. Click OK to save this threshold.

State Mismatch for Time Threshold

A state mismatch for time threshold is defined by specifying both a “normal” state for the sensor and a

maximum time permitted value. If any state other than the normal state is reported by the sensor for more

than the maximum amount of time permitted an alert condition is reported.

To define an alert state for time threshold:

1. Launch the Sensor & Alert Settings task that corresponds to the state-based sensor for which you

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 293 294

No comments

APC AP7602 Instruction Manual Page 154