APC InfraStruXure Power Supply Specifications download pdf (Page 43)

Quick Configuration: Control Console

InfraStruXure 20kW System: Installation, Operation, and Maintenance 37

2. Use Ping with a size of 113 bytes to assign the IP address defined by the ARP command. For the

IP address defined in step 1, use one of the following Ping commands:

– Windows command format:

ping 159.215.15.141 -l 113

– LINUX command format:

ping 159.215.15.141 -s 113

3. Use Telnet to access the system at its newly assigned

IP address. For example:

telnet 159.215.15.141

4. Use apc for both the user name and password.

5. See “Configuring settings on the control console” on page 37 to finish the configuration.

Configuring settings on the control console

After you log on at the control console, as described in either “Control Console” on page 36 or

“Remote access to the control console” on page 36:

1. Choose Network from the Control Console menu.

2. Choose TCP/IP from the Network menu.

3. If necessary, change the Boot Mode setting to Manual.

4. Set the System IP, Subnet Mask, and Default Gateway address values.

5. Press

CTRL-C to exit to the Control Console menu.

6. Log out (option 4 in the Control Console menu) to have the changes take effect.

Note

If you disconnected a cable during the procedure described in “Control Console” on

page 36, reconnect that cable and restart the associated service.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 91 92

No comments

APC InfraStruXure Power Supply Specifications Page 43