APC InfraStruXure Power Supply Specifications download pdf (Page 47)

Operation: Display Interface

InfraStruXure 20kW System: Installation, Operation, and Maintenance 41

Top-Level Status screen

After the display interface has established communication with

the InfraStruXure 20kW System, the Top-Level Status screen

by default, displays the following:

Top-Level Menu screen

From the Top-Level Menu screen you can command,

configure, and monitor the InfraStruXure 20kW System.

Charge Percentage The percentage of battery capacity that is available.

Load Percentage The percentage of system capacity that is being used to

supply conditioned power to the connected load.

Input Voltage/ Output

Voltage/ Input Frequency

The input voltage from the main power source, the output

voltage supplied to the load equipment, and the frequency of

the input power.

Run Time The runtime that can be expected from the batteries. The

intelligence module calculates the runtime based on both the

amount of power required by the load equipment and the

capacity of the battery modules in the system.

Note

After the display interface has been inactive for a period of time (specified by the

password time-out setting under the Display menu), the interface reverts to the Top-

Level Status screen.

Chrg 100%

Load 050%

208Vin 208Vout 60Hz

Runtime: 0hr 30min

For information on specific screens accessed through the top-level menu screen,

see pages 42–46.

Control

Status

Setup

Accessories

Logging

Display

Diags

Help

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 91 92

No comments

APC InfraStruXure Power Supply Specifications Page 47