APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications download pdf (Page 21)

150 kW InfraStruXure Power Distribution Unit 13

Installation Procedures

Level the PDU and NetShelter Enclosures

Leveling feet are provided under each bottom corner of the enclosure to help provide a stable base if

the selected floor space is uneven. However, leveling feet are not intended to compensate for a badly

sloped surface. To level the enclosure:

1. Fit the 14-millimeter end of the open-ended wrench (provided) to the hex head just above the

round pad on the bottom of the leveling foot. Turn the wrench clockwise to extend the leveling

foot until it makes firm contact with the floor.

2. Repeat step 1 for each of the remaining leveling feet.

3. Use a level to determine which feet need further adjustment to level the enclosure. Adjust as

necessary.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications Page 21