APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications download pdf (Page 22)

14 150 kW InfraStruXure Power Distribution Unit

Connect the Power Source to the PDU

Access the PDU main input breaker

Open the back doors of the PDU by first unlocking the smaller door on top using the provided key,

and then loosening the two screws holding the bottom half of this door in place.

Attach conduit to the PDU for the input conductors

1. Remove the top or bottom rectangular gland plate by loosening the captive screws using a

Phillips or standard screwdriver:

– For wiring under a raised floor: Remove the gland plate at the bottom of the PDU.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

No comments

APC 150kVA PDU W/ 480 PRI 208/120 SEC K1 XMER Specifications Page 22