PowerNet MIB Reference Guide
28
Chapter 4: How to Manage an
Environmental Monitor
This chapter describes how to use the following PowerNet MIB OIDs to manage (monitor, configure,
and control) an Environmental Monitor through its Management Card or PowerNet Agent.
• External Environmental Monitor (em) OIDs
• Integrated Environmental Monitor (iem) OIDs (AP9618 or AP9619 Network
Management Card Only)
• Measure-UPS (mUps) OIDs
Note:
The external Environmental Monitor (em) OIDs expand on the management
capabilities provided by the mUps OIDs. The mUps OIDS have been kept in the MIB
for compatability with previous versions of the PowerNet MIB.
External Environmental Monitor (em) OIDs
Three categories of em OIDs provide for managing external Environmental Monitors.
• [emIdent] OID
• [emConfig] OIDs
• [emStatus] OIDs
To access these em OIDs in the PowerNet MIB, do the following:
1. Select [products] under [apc].
2. Select [hardware].
3. Select [environmentalMonitor].
4. Select [external].
[emIdent] OID
A single [emIdent] OID, emIdentFirmwareRevision, identifes the firmware used by the
Environmental Monitor.
Comments to this Manuals