APC AP9630 User's Guide Page 14
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
12UPS Network Management Card 2 User’s Guide
The options below are not available for all UPS devices.
Battery Status
Battery Capacity
The percentage of the UPS battery capacity that is available to support the attached
equipment.
Battery Voltage The DC voltage of the batteries.
External Batteries The number of batteries connected to the UPS, excluding any internal batteries.
Field Description
Nominal Battery
Voltage
The rated voltage capacity of the UPS batteries; the DC voltage that the batteries are rated
to supply when the UPS uses its battery for output power.
Actual Battery Bus
Voltage
The available DC power.
External Battery
Cabinet Rating
The battery cabinet Amp-Hour rating of an external battery source.
Batteries The total number of batteries (both internal and external) that the UPS has.
Bad Batteries The number of “bad” batteries (batteries that need to be replaced).
Battery Current The current being output from the battery.
Replace Battery Date The recommended date for replacing your UPS batteries.
Intelligence Module
Information about the Intelligence Module. You may be asked for this information
(Firmware Revision, Manufacture Date, Serial Number, and Hardware Revision) when
seeking assistance from APC Customer Support.
Input Voltage The AC voltage (VAC) being received by the UPS.
Bypass Input Voltage The AC voltage (VAC) used when the UPS is in bypass mode.
Input Frequency The frequency in Hertz (Hz) of the voltage being received by the UPS.
Frequency The frequency in Hertz (Hz) shared by the input voltage and output voltage.
Bypass Frequency The frequency in Hertz (Hz) of the voltage used when the UPS is in bypass mode.
Output Current The current, in Amps, applied to the load.
Output Frequency The frequency in Hertz (Hz) of the output voltage.
Load Power The UPS load as a percentage of available Watts.
Apparent Load Power The UPS load as a percentage of available VA.
Modules
Information about the modules installed in the UPS. You may be asked for this information
(Firmware Revision, Manufacture Date, Serial Number, and Hardware Revision) when
seeking assistance from APC Customer Support.
Power Module
Information about the power module installed in the UPS. You may be asked for this
information when seeking assistance from APC Customer Support.
Field Description
- User’s Guide 1
- ロードできます。 2
- 동봉된 CD 안에 한국어 매뉴얼이 있습니다 2
- Introduction 3
- IPv4 initial setup 4
- IPv6 initial setup 4
- Internal Management Features 5
- Front Panel (AP9630) 7
- Front Panel (AP9631) 7
- LED Descriptions 8
- Watchdog Features 9
- Web User Interface 10
- URL format examples 11
- Home Screen 12
- UPS on Status menu 13
- Field Description 14
- Outlet Groups on Status menu 15
- Universal I/O on Status menu 15
- Network on Status menu 15
- Controlling UPS and Security 16
- Action Description 17
- Outlet Groups on Control menu 19
- Security on Control menu 20
- Network on Control menu 21
- Configuring your Settings: 1 22
- Field Description 25
- UPS General screen 27
- Self-Test Schedule screen 28
- Shutdown Scheduling 28
- Firmware Update screen 29
- ftp> quit 30
- 221 Goodbye 30
- Third Party Support screen 32
- Universal I/O screens 33
- Input Contacts screen 34
- Output Relay screen 34
- Security menu 36
- Remote Users authentication 37
- RADIUS screen 38
- Configuring the RADIUS Server 38
- Firewall screen 39
- Configuring your Settings: 2 40
- Option Description 41
- DHCP response options 42
- address of the primary DNS 43
- Testing DNS screen 44
- Web access screen 44
- Web SSL Certificate screen 45
- Console screen 45
- SNMP screens 46
- SNMPv3 47
- FTP Server screen 48
- Notification menu 49
- E-mail notification screens 51
- SNMP Trap Receivers screen 53
- SNMP Traps test screen 54
- Remote Monitoring Service 54
- General menu 55
- Configure Links screen 56
- Logs on Configuration menu 57
- Tests menu 59
- Logs and About menus 60
- Data log 61
- Path: Logs > UPS 63
- Energy Usage 64
- Firewall Log 64
- About the UPS device 65
- Support screen 66
- System requirements 67
- Installation 67
- Summary of the procedure 68
- Contents of the .ini file 68
- Detailed procedures 68
- Messages in config.ini 70
- Related Topics 71
- File Transfers 72
- NMC over the network: 73
- NMC, see “FTP Server” 73
- C:\>cd apc 73
- C:\apc>dir 73
- Use XMODEM to upgrade one NMC 74
- NMC firmware: 75
- iplist.txt file 76
- Verifying Upgrades 77
- Troubleshooting 79
- SNMP Issues 80
- Synchronization Problems 80
- Two-Year Factory Warranty 81
- Warranty claims 82
- Radio Frequency Interference 83
- Australia and New Zealand 84
- European Union 84
- Korean 한국 84
- 990-3402E-001 85
Related products and manuals for Networking APC AP9630
Networking APC IP DSLAM User's Guide
(67 pages)
(67 pages)
Networking APC AP9630 User Manual
(117 pages)
(117 pages)
Networking APC AP9630 User Manual
(32 pages)
(32 pages)
Networking APC AP9224110 Specifications
(16 pages)
(16 pages)
Networking APC AP9608 Specifications
(9 pages)
(9 pages)
Networking APC AP9608 User Manual
(4 pages)
(4 pages)
Networking APC ADSL 4-Port User Manual
(13 pages)
(13 pages)
Networking APC 2200VA User Manual
(6 pages)
(6 pages)
Networking APC AP9622 User Manual
(4 pages)
(4 pages)
Networking APC AP9630 User's Guide
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 0.145 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals