APC AP9630 User's Guide download pdf (Page 53)

51UPS Network Management Card 2 User’s Guide

E-mail SSL Certificates.

Path: Configuration > Notification > E-mail > SSL Certificates

Load a mail SSL certificate on the NMC for greater security. The file must have an extension of .crt or

.cer

. Up to five files can be loaded at any given time.

When installed, the certificate details also display here. An invalid certificate will display “n/a” for all fields

except File Name.

Certificates can be deleted from this screen. Any e-mail recipients using the certificate should be manually

modified to remove reference to this certificate.

E-mail test.

Path: Configuration > Notification > E-mail > Test

Send a test message to a configured recipient.

SNMP Trap Receivers screen

Trap Receivers.

Path: Configuration > Notification > SNMP Traps > Trap Receivers

With Simple Network Management Protocol (SNMP) traps, you can get automatically notified of significant

UPS events. They are a useful tool for monitoring devices on your network.

The trap receivers are displayed by NMS IP/Host Name, where NMS stands for Network Management

System. You can configure up to six trap receivers.

To configure a new trap receiver, click Add Trap Receiver. To edit (or delete) one, click its IP address/ host

name.

If you delete a trap receiver, all notification settings configured under “Configuring event actions” for the

deleted trap receiver are set to their default values.

Select either the SNMPv1 or SNMPv3 radio button to specify the trap type. For an NMS to receive both types

of traps, you must separately configure two trap receivers for that NMS, one for each trap type.

Field Description

Trap Generation Enable (the default) or disable trap generation for this trap receiver.

Powernet MIB Trap Generation/

RFC1628 "

Choose between these two MIB trap generation types for each trap created.

The Powernet option is customized for Schneider Electric and contains many

additional variables relevant to the company’s products. The RFC1628 is the

generic, standard Management Information Base (MIB) for UPS devices.

If you use the RFC1628 MIB, you can also use the three RFC1628 event

notifications (see “Configuring event actions”). They can be used to avoid

having to configure notification events outside the NMC environment, see

RFC1628 MIB.

NMS IP/Host Name

The IPv4/ IPv6 address or host name of this trap receiver. The default, 0.0.0.0,

leaves the trap receiver undefined.

Language

Chose a language from the drop-down list. This can differ from the UI and from

other trap receivers.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 84 85

Comments to this Manuals

No comments

APC AP9630 User's Guide Page 53

Comments to this Manuals

Related products and manuals for Networking APC AP9630