APC AP9630 User's Guide Page 40
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
38UPS Network Management Card 2 User’s Guide
Configuring your Settings: 2
With the Configuration menu options, you can set fundamental operational values for your UPS and NMC.
See the sections below and also “Configuring your Settings: 1”.
• “Network on Configuration menu”
• “Notification menu”
• “General menu”
• “Logs on Configuration menu”
Network on Configuration menu
TCP/IP settings for IPv4 screen
Path: Configuration > Network > TCP/IP > IPv4 Settings
This option displays any current IPv4 address, subnet mask, default gateway, MAC address, and boot mode of
the UPS Network Management Card 2 (NMC). Use the lower part of the screen to configure those settings,
including disabling IPv4.
For information on DHCP and DHCP options, see RFC2131 and RFC2132.
*
Vendor Class: APC
Client ID: The MAC address of the device. If you change this value, the new value must be unique on the LAN.
User Class: The name of the application firmware module, see “File Transfers”.
Option Description
Manual Specify your IPv4 address, subnet mask, default gateway here.
BOOTP*
At 32-second intervals, the device requests network assignment from any BOOTP server:
• If it receives a valid response, it starts the network services.
• If previously configured network settings exist, and it receives no valid response to five
requests (the original and four retries), by default it uses those previously configured
settings. This ensure that it remains accessible if a BOOTP server is no longer available.
• If it finds a BOOTP server, but the request to that server does not work or times out, the
device stops requesting network settings until it is restarted.
DHCP*
At 32-second intervals, the device requests network assignment from any DHCP server:
• If a DHCP server is found, but the request to that server does not work or times out, it stops
requesting network settings until it is restarted.
• Optionally, you can set up the device with Require vendor specific cookie to accept DHCP
Address in order to accept the lease and start the network services.
See “DHCP response options”.
- User’s Guide 1
- ロードできます。 2
- 동봉된 CD 안에 한국어 매뉴얼이 있습니다 2
- Introduction 3
- IPv4 initial setup 4
- IPv6 initial setup 4
- Internal Management Features 5
- Front Panel (AP9630) 7
- Front Panel (AP9631) 7
- LED Descriptions 8
- Watchdog Features 9
- Web User Interface 10
- URL format examples 11
- Home Screen 12
- UPS on Status menu 13
- Field Description 14
- Outlet Groups on Status menu 15
- Universal I/O on Status menu 15
- Network on Status menu 15
- Controlling UPS and Security 16
- Action Description 17
- Outlet Groups on Control menu 19
- Security on Control menu 20
- Network on Control menu 21
- Configuring your Settings: 1 22
- Field Description 25
- UPS General screen 27
- Self-Test Schedule screen 28
- Shutdown Scheduling 28
- Firmware Update screen 29
- ftp> quit 30
- 221 Goodbye 30
- Third Party Support screen 32
- Universal I/O screens 33
- Input Contacts screen 34
- Output Relay screen 34
- Security menu 36
- Remote Users authentication 37
- RADIUS screen 38
- Configuring the RADIUS Server 38
- Firewall screen 39
- Configuring your Settings: 2 40
- Option Description 41
- DHCP response options 42
- address of the primary DNS 43
- Testing DNS screen 44
- Web access screen 44
- Web SSL Certificate screen 45
- Console screen 45
- SNMP screens 46
- SNMPv3 47
- FTP Server screen 48
- Notification menu 49
- E-mail notification screens 51
- SNMP Trap Receivers screen 53
- SNMP Traps test screen 54
- Remote Monitoring Service 54
- General menu 55
- Configure Links screen 56
- Logs on Configuration menu 57
- Tests menu 59
- Logs and About menus 60
- Data log 61
- Path: Logs > UPS 63
- Energy Usage 64
- Firewall Log 64
- About the UPS device 65
- Support screen 66
- System requirements 67
- Installation 67
- Summary of the procedure 68
- Contents of the .ini file 68
- Detailed procedures 68
- Messages in config.ini 70
- Related Topics 71
- File Transfers 72
- NMC over the network: 73
- NMC, see “FTP Server” 73
- C:\>cd apc 73
- C:\apc>dir 73
- Use XMODEM to upgrade one NMC 74
- NMC firmware: 75
- iplist.txt file 76
- Verifying Upgrades 77
- Troubleshooting 79
- SNMP Issues 80
- Synchronization Problems 80
- Two-Year Factory Warranty 81
- Warranty claims 82
- Radio Frequency Interference 83
- Australia and New Zealand 84
- European Union 84
- Korean 한국 84
- 990-3402E-001 85
Related products and manuals for Networking APC AP9630
Networking APC IP DSLAM User's Guide
(67 pages)
(67 pages)
Networking APC AP9630 User Manual
(117 pages)
(117 pages)
Networking APC AP9630 User Manual
(32 pages)
(32 pages)
Networking APC AP9224110 Specifications
(16 pages)
(16 pages)
Networking APC AP9608 Specifications
(9 pages)
(9 pages)
Networking APC AP9608 User Manual
(4 pages)
(4 pages)
Networking APC ADSL 4-Port User Manual
(13 pages)
(13 pages)
Networking APC 2200VA User Manual
(6 pages)
(6 pages)
Networking APC AP9622 User Manual
(4 pages)
(4 pages)
Networking APC AP9630 User's Guide
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 1.884 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals