APC AP9630 User's Guide Page 8
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
6UPS Network Management Card 2 User’s Guide
LED Descriptions
Status LED
This LED (light-emitting diode) indicates the status of the NMC.
Link-RX/TX (10/100) LED
This LED indicates the network status of the NMC.
Condition Description
Off
One of the following situations exists:
• The NMC is not receiving input power.
• The NMC is not operating properly. It may need to be repaired or replaced. Contact
Customer Support. See “APC Worldwide Customer Support”.
Solid green The NMC has valid TCP/IP settings.
Solid orange
A hardware malfunction has been detected in the NMC. Contact Customer Support.
See “APC Worldwide Customer Support”.
Flashing green The NMC does not have valid TCP/IP settings.
1
Flashing orange The NMC is making BOOTP requests.
1
Alternately flashing
green and orange
If the LED is flashing slowly, the NMC is making DHCP
2
requests.
1
If the LED is flashing rapidly, the NMC is starting up.
1. If you do not use a BOOTP or DHCP server, see the Network Management Card Installation Manual provided in
printed format and on the Network Management Card Utility CD in PDF to configure the TCP/IP settings of the
NMC.
2. To use a DHCP server, see “DHCP response options”.
Condition Description
Off
One or more of the following situations exist:
• The NMC is not receiving input power.
• The cable that connects the NMC to the network is disconnected or not
functioning properly.
• The device that connects the NMC to the network is turned off or not operating
correctly.
• The NMC itself is not operating properly. It may need to be repaired or replaced.
Contact Customer Support. See “APC Worldwide Customer Support”
Solid green The NMC is connected to a network operating at 10 Megabits per second (Mbps).
Solid orange The NMC is connected to a network operating at 100 Mbps.
Flashing green The NMC is receiving or transmitting data packets at 10 Mbps.
Flashing orange The NMC is receiving or transmitting data packets at 100 Mbps.
- User’s Guide 1
- ロードできます。 2
- 동봉된 CD 안에 한국어 매뉴얼이 있습니다 2
- Introduction 3
- IPv4 initial setup 4
- IPv6 initial setup 4
- Internal Management Features 5
- Front Panel (AP9630) 7
- Front Panel (AP9631) 7
- LED Descriptions 8
- Watchdog Features 9
- Web User Interface 10
- URL format examples 11
- Home Screen 12
- UPS on Status menu 13
- Field Description 14
- Outlet Groups on Status menu 15
- Universal I/O on Status menu 15
- Network on Status menu 15
- Controlling UPS and Security 16
- Action Description 17
- Outlet Groups on Control menu 19
- Security on Control menu 20
- Network on Control menu 21
- Configuring your Settings: 1 22
- Field Description 25
- UPS General screen 27
- Self-Test Schedule screen 28
- Shutdown Scheduling 28
- Firmware Update screen 29
- ftp> quit 30
- 221 Goodbye 30
- Third Party Support screen 32
- Universal I/O screens 33
- Input Contacts screen 34
- Output Relay screen 34
- Security menu 36
- Remote Users authentication 37
- RADIUS screen 38
- Configuring the RADIUS Server 38
- Firewall screen 39
- Configuring your Settings: 2 40
- Option Description 41
- DHCP response options 42
- address of the primary DNS 43
- Testing DNS screen 44
- Web access screen 44
- Web SSL Certificate screen 45
- Console screen 45
- SNMP screens 46
- SNMPv3 47
- FTP Server screen 48
- Notification menu 49
- E-mail notification screens 51
- SNMP Trap Receivers screen 53
- SNMP Traps test screen 54
- Remote Monitoring Service 54
- General menu 55
- Configure Links screen 56
- Logs on Configuration menu 57
- Tests menu 59
- Logs and About menus 60
- Data log 61
- Path: Logs > UPS 63
- Energy Usage 64
- Firewall Log 64
- About the UPS device 65
- Support screen 66
- System requirements 67
- Installation 67
- Summary of the procedure 68
- Contents of the .ini file 68
- Detailed procedures 68
- Messages in config.ini 70
- Related Topics 71
- File Transfers 72
- NMC over the network: 73
- NMC, see “FTP Server” 73
- C:\>cd apc 73
- C:\apc>dir 73
- Use XMODEM to upgrade one NMC 74
- NMC firmware: 75
- iplist.txt file 76
- Verifying Upgrades 77
- Troubleshooting 79
- SNMP Issues 80
- Synchronization Problems 80
- Two-Year Factory Warranty 81
- Warranty claims 82
- Radio Frequency Interference 83
- Australia and New Zealand 84
- European Union 84
- Korean 한국 84
- 990-3402E-001 85
Related products and manuals for Networking APC AP9630
Networking APC IP DSLAM User's Guide
(67 pages)
(67 pages)
Networking APC AP9630 User Manual
(117 pages)
(117 pages)
Networking APC AP9630 User Manual
(32 pages)
(32 pages)
Networking APC AP9224110 Specifications
(16 pages)
(16 pages)
Networking APC AP9608 Specifications
(9 pages)
(9 pages)
Networking APC AP9608 User Manual
(4 pages)
(4 pages)
Networking APC ADSL 4-Port User Manual
(13 pages)
(13 pages)
Networking APC 2200VA User Manual
(6 pages)
(6 pages)
Networking APC AP9622 User Manual
(4 pages)
(4 pages)
Networking APC AP9630 User's Guide
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 0.243 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals