APC Network Management Card AP9617 User's Guide download pdf (Page 55)

®®

USER’S GUIDE

network management card

Syslog test (Web interface). This option allows you to send a test

message to the Syslog servers configured in the Syslog Server section.

1. Select the Priority you want to assign to the test message.

2. Define the Test Message using any text that meets the format

described in Syslog message format below. For example, APC: Test

message, meets the required message format.

3. Click Apply to have the Management Card send a Syslog message

that uses the defined Priority and Test Message settings.

Syslog message format. A Syslog message has three parts:

• The priority (PRI) part identifies the Syslog priority assigned to the

message’s event and the facility code assigned to messages sent by

the Management Card.

• The Header includes a time stamp and the IP address of the

Management Card.

• The message (MSG) part has two fields:

– A TAG field, which is followed by a colon and a space, identifies

the event type (APC, System, or UPS, for example)

– A CONTENT field provides the event text, followed by a space

and the event code

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 149 150

No comments

APC Network Management Card AP9617 User's Guide Page 55