®
®®
®
USER’S GUIDE
network management card
61
Detailed UPS Status
In the Web interface, you use the Status option in the UPS menu to access
the following UPS status information; in the control console, this status
information is listed above the UPS menu.
• The current status of the
UPS (for information about how to access a
list of the
UPS events that can be reported as part of the UPS status,
see “Event List” page)
• The reason for the last transfer to battery power at the
UPS
• The internal temperature of the UPS
• The runtime that is currently available to the UPS
• The values described in Utility Voltage Status, Output Power Status,
and Battery
• The Fault tolerance parameters described in Fault Tolerance
(Symmetra or Symmetra 3-Phase UPS)
The UPS menu in the control console has a Detailed Status
(Smart-UPS or Matrix-UPS) or Detailed UPS Information
(Symmetra or Silcon UPS) option that accesses expanded
descriptions of the UPS status. In addition, for Symmetra
UPS models, a Faults & Alarms option accesses
descriptions of any faults or alarms reported as part of the
UPS status.
See also
A Silcon UPS can report a non-specific fault for about 50
different conditions. For information about the conditions that
are mapped to these non-specific faults, see the
dp3etrap.pdf document located in the .\help\dp3e\ directory
on the APC Network Management Card utility CD.
Comments to this Manuals