APC Network Management Card AP9617 User's Guide download pdf (Page 94)

®®

USER’S GUIDE

network management card

Probe status

The Web interface uses Temperature and Humidity graphs to identify

whether the reported value exceeds a low (blue) or high (red) threshold for

each of the identified probes: up to two probes at an AP9617 Network

Management Card; up to three probes at an AP9618 or AP9619, with the

Integrated Environmental Monitor probe listed last.

In the control console, the status options in the Environmental Monitor

Settings menus access a report that identifies the high and low thresholds

for the specific environmental monitor’s probes, and whether any of those

thresholds are currently violated.

Contact status

The Web interface identifies the current state (Disabled, No Fault, or Fault

Present) for each identified input contact. These contacts can include up to

four contacts for an external environmental monitor, and two contacts for

the Integrated Environmental Monitor at an AP9618 or AP9619 Network

Management Card.

In the control console, the status options in the Environmental Monitor

Settings menus access a report that identifies the current fault condition for

each of the specific environmental monitoring’s contacts.

Output relay status (AP9618 or AP9619)

In the Web interface, the current state of the Integrated Environmental

Monitor’s output relay at an AP9618 or AP9619 Network Management Card

is reported immediately below the contact settings status.

In the control console, the Output Relay option in the Integrated

Environmental Monitor menu reports the current condition.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 149 150

No comments

APC Network Management Card AP9617 User's Guide Page 94