145
8.2 802.1p Commands
8.2.1 Bridge port accessprio Commands
8.2.1.1 Get bridge port accessprio
Description: Use this command to get.
Command Syntax: get bridge port accessprio [portid <portid-val>]
[regenprio <regenprio-val >]
Parameters
Name Description
portid <portid-val >
Port number of the port for which this entry contains bridge
management information.
Type : Get-—Optional
Valid values: 1-386
regenprio <regenprio-
val >
Regenerated user priority from which the access priority is
mapped.
Type : Get —Optional
Valid values: 0 - 7
Example
$ get bridge port accessprio portid 1 regenPrio 1
Output
PortId : 1 regenPrio : 1
AcessPriority : 0
Output field
Field Description
PortId
Port number of the port for which this entry contains bridge
management information.
regenPrio
Regenerated user priority from which the access priority is
mapped.
AcessPriority
The Outbound Access Priority the received frame is
mapped to.
References
• Bridge port commands
8.2.2 Bridge port prioinfo Commands
8.2.2.1 Get bridge port prioinfo
Description Use this command to get.
Command Syntax get bridge port prioinfo [portid <portid-val >]
8.2.2.2 Modify bridge port prioinfo
Description: Use this command to modify.
Command Syntax: modify bridge port prioinfo portid portid [defprio
<defprio-val>] [numtrfclass <numtrfclass-val>] [defsvprio <defsvprio-
val>]
Parameters:
Name Description
portid <portid>
Port number of the port for which this entry contains bridge
management information.
Comments to this Manuals