APC IP DSLAM User's Guide Page 221

  • Download
  • Add to my manuals
  • Print
  • Page
    / 603
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 220
213
Type: Modify Optional
Get Optional
Valid values: 0 - 4095
macaddr <macaddr-
val>
The destination Group MAC address in a frame, to
which this entry's filtering information applies
Type: Get -- Optional
Example
$ get bridge mcast forwarding vlanid 1 macaddr 01:00:5E:00:08:01
Output
Vlan Index : 1 Mac Address : 01:00:5E:00:08:01
Egress ports : 1 2
Group Learnt : 1
Output Fields
Field Description
VLAN Index
The VLAN id for this VLAN. In devices
supporting "Shared Vlan for multicast"
capability, the information for a multicast MAC
address is shared across VLANS. Hence,
vlanid is not required and is passed as zero. In
devices supporting "Independent Vlan for
multicast" capability. Each vlan can have its
own information for a multicast MAC address.
Hence, VLAN id is a mandatory parameter and
a valid value of vlanid must be passed. For No
Vlan case VLAN id is not required. When Vlan
transparency feature is supported, the valid
range for vlanid also includes 4097. In case of
"Shared Vlan Multicast also there shall always
be a seperate entry for 4097 if the VLAN with
that VLAN Id is created. VLAN here means the
802.1q Vlan in case of Native Vlan mode and
Virtual Vlan in case of Stacked Vlan Mode.
Mac Address
The destination Group MAC address in a
frame, to which this entry's filtering information
applies
Egress ports
The complete set of bridge ports, in this
VLAN, to which frames destined for this Group
MAC address are currently being explicitly
forwarded. This does not include ports for
which this address is only implicitly forwarded,
in the dot1qForwardAllPorts list.
Group Learnt
The subset of bridge ports in EgressPorts,
which were learned by GMRP or some other
dynamic mechanism, in this Filtering database.
References
bridge static multicast
8.7.3 Bridge mcast fwdunreg Commands
8.7.3.1 Get bridge mcast fwdunreg
Description: Use this command to get.
Command Syntax: get bridge mcast fwdunreg [vlanid <vlanid-val>]
8.7.3.2 Modify bridge mcast fwdunreg
Description Syntax:
Use this command to modify.
Page view 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 602 603

Comments to this Manuals

No comments