149
8.3 ABOND Commands
8.3.1 ABOND group intf Commands
8.3.1.1 Get abond group intf
Description: Use this command to get.
Command Syntax: get abond group intf [ifname <interface-name>]
8.3.1.2 Create abond group intf
Description: Use this command to create.
Command Syntax: create abond group intf ifname<interface-name>
groupid <groupid-val> [ minaggrrateupstrm <minaggrrateupstrm-
val> ] [ minaggrratednstrm <minaggrratednstrm-val> ]
[ diffdelaytolupstrm <diffdelaytolupstrm-val> ] [ diffdelaytoldnstrm
<diffdelaytoldnstrm-val> ] [ asmprotocol Enable | Disable ]
[ sidformat EightBitSid | TwelveBitSid ] [ maxrxbitrateratio
<maxrxbitrateratio-val> ] [ linkhecthrshld <linkhecthrshld-val> ]
[ numoflinksupforgrpup One | All ] [ asmirlthreshold
<asmirlthreshold-val> ] [ maxatmportusrate <maxatmportusrate-val> ]
8.3.1.3 Delete abond group intf
Description: Use this command to delete.
Command Syntax: delete abond group intf ifname <interface-
name>
8.3.1.4 Modify abond group intf
Description: Use this command to modify.
Command Syntax: modify abond group intf ifname <interface-
name> [ groupid <groupid-val> ] [ minaggrrateupstrm
<minaggrrateupstrm-val> ] [ minaggrratednstrm <minaggrratednstrm-
val> ] [ diffdelaytolupstrm <diffdelaytolupstrm-val> ]
[ diffdelaytoldnstrm <diffdelaytoldnstrm-val> ] [ asmprotocol Enable |
Disable ] [ sidformat EightBitSid | TwelveBitSid ]
[ maxrxbitrateratio <maxrxbitrateratio-val> ] [ linkhecthrshld
<linkhecthrshld-val> ] [ numoflinksupforgrpup One | All ]
[ asmirlthreshold <asmirlthreshold-val> ] [ maxatmportusrate
<maxatmportusrate-val> ] [ enable | disable ]
Parameters
Name Description
ifname <interface-
name>
This specifies the interface index used for the ATM
Based Multi pair Bonding type of interfaces. Valid Value
is abond-X. Modification and deletion is not possible if
interface is enabled
Type: Create- Mandatory
Delete ---Mandatory
Modify - Mandatory
Get - Optional
Valid values: 0 - 31
groupid <groupid-val>
This specifies the group id configured for this interface.
This field is configured statically when the bonded group
is provisioned and must not be changed while the group
is in service. These fields may be used by an operator to
help identify mis-configuration or to assist in
management or debugging of the link.
Type: Create - Mandatory
Modify - Optional
Comments to this Manuals