APC IP DSLAM User's Guide download pdf (Page 567)

559

this port, as long as 'gvrpstatus' in 'GVRP INFO'

command is also enabled for this device. When

this is 'disable', even if 'gvrpstatus' in 'GVRP INFO'

command is 'enable' for the device, GVRP will be

'disable' on this port. In such a case, any GVRP

packets received will be silently discarded and no

GVRP registrations will be propagated from other

ports. This object affects all GVRP Applicant and

Registrar state machines on this port. This

configuration shall not be effective for a bridge

port created over PPPOE/IPOE interface.

Failed Registrations

The total number of failed GVRP registrations, for

any reason, on this port.

Last Pdu Origin

The Source MAC Address of the last GVRP

message received on this port.

Restricted Vlan

Registration

The state of Restricted VLAN Registration on this

port. If the value of this control is true(1), then

creation of a new dynamic VLAN entry is

permitted only if there is a Static VLAN

Registration Entry for the VLAN concerned, in

which, the Registrar Administrative Control value

for this port is, Normal Registration.

GVRP PacketsPrio'

For the GVRP PDUs generated by the Control

Plane, this priority shall be used for choice of

traffic class/ Queue on outgoing interface. In case

the bridge port is over an Aggregated ATM VC,

this will also be used to identify the VC, on which

the packet is to be sent.

PS VLAN Index

Port service Vlan Index, the Service VLAN ID

assigned to frames received on this port. This is

applicable only to Non-Provider ports. The value

zero here means that this field is not applicable.

psvlanid and ctosprofileid both can be non-zero.

But they both can not be zero. In case of bridge

port on PPPoE and IPoE interfaces psvlanid value

must be non-zero, ctosprofileid is ignored for such

a port. For other bridge ports† psvlanid value can

be zero. If both psvlanid and ctosprofileid have

non-zero value for such ports, the ctosprofileid

shall be applied and psvlanid shall be ignored

Port Provider Status

This specifies if the port is a provider port or a

Non-Provider port as per Vlan stacking model.

This field is applicable only in Vlan stacking

scenario. The modification of this parameter is

allowed only when the bridge port is disabled. If

the value of this field is GS_STATE_ENABLE i.e

the port is a provider port, then Priority of the

incoming C-Vlan tag is kept preserved irrespective

of gsvSVlanCvlanQosPreserveMode of the Svlan

to which the packet belongs to.

CtoS Profile Id

This specifies the CtoS profileId for the Vlan Map

profile associated† with this interface. Value zero

for this means no CtoS profile associated with this

port.† psvlanid and ctosprofileid both can be non-

zero. But they both can not be zero. In case of

bridge port on PPPoE and IPoE interfaces

psvlanid value must be non-zero, ctosprofileid is

ignored for such a port. For other bridge ports†

psvlanid value can be zero. If both psvlanid and

ctosprofileid have non-zero value for such ports,

the ctosprofileid shall be applied and psvlanid

shall be ignored.

References

• GVRP Commands

1 2 ... 562 563 564 565 566 567 568 569 570 571 572 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 567

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM