APC IP DSLAM User's Guide download pdf (Page 253)

100

101

245

Parameters

Name Description

ifname <interface-

name>

The ADSL interface name

Type: Get － Mandatory

Valid values: dsli-0 - dsli-23

Example

$ get adsl atur channel ifname dsli-0

Output

Ifname : dslf-0

Interleave Delay(ms) : 10 Curr Tx Rate(bps) : 10

Prev Tx Rate(bps) : 10 Crc Block Length(byte) : 10

Gs Curr Atm Status : 1 GsSymbolsPerRsWord : 10

GsRsDepth : 10 GsRedundantBytesPerRsCode : 10

AturChanPerfAtmCD : 10 AturChanPerfAtmCU : 10

AturChanGsINPup : 10 AturChanGsL0up : 10

AturChanGsM0up : 10 AturChanGsT0up : 10

AturChanGsB0up : 10

Output Fields

FIELD Description

Ifname

The ADSL Interface Name

Interleave Delay(ms)

Interleave delay for this channel. Interleave delay

applies only to the interleave channel and defines

the mapping (relative spacing) between

subsequent input bytes at the interleaver input and

their placement in the bit stream at the interleaver

output. Larger numbers provide greater separation

between consecutive input bytes in the output bit

stream, allowing for improved impulse noise

immunity at the expense of payload latency.

Curr Tx Rate(bps)

Actual transmit rate on this channel

Prev Tx Rate(bps)

The rate at the time of the last

adslAturRateChangeTrap event.

Crc Block

Length(byte)

Indicates the length of the channel data-block on

which the CRC operates.

Gs Curr Atm Status

Indicates an ncd or lcd failure if the counter

surpasses 127. If neither ATM counter surpasses

127, the return value will be NoAtmDefect.

GsSymbolsPerRsWor

Indicates number of DMT symbols per Reed-

Solomon code word (S) in the upstream direction

Note that S is not restricted to interleaved mode

only. Even in fast mode, S is a valid constant

value and is equal to 1.

GsRsDepth

Indicates interleaving depth (D) in the upstream

direction Note that D is not restricted to

interleaved mode only. Even in fast mode, D is a

valid constant value and is equal to 1.

GsRedundantBytesPe

rRsCode

Indicates number of redundant bytes (R) per

Reed-Solomon code in the upstream direction

AturChanPerfAtmCD

Provides a count of the total number of cells

passed through the cell delineation and HEC

function process operating on the ATM Data Path

while in the SYNC state.(length = 4 bytes).

AturChanPerfAtmCU

Provides a count of the total number of cells in the

ATM Data Path delivered at the interface(s)

between ATU-R and ATM switching layer.(length

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 253

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM