APC IP DSLAM User's Guide download pdf (Page 20)

ADSL2/2+ IP DSLAM

12

MAC and IP address

Spanning Tree (802.1d) compliant

Traffic prioritization (802.1p)

Uplink Aggregation (802.3ad)

Future(SW upgrade) BRAS support 802.1x, DHCP Server & Relay, PPPoE,

MPLS, VLAN-based VPN, L3 router feature, L2TP

Input Rate Limiting (IRL) on a per-AAL5 interface

Output Rate Limiting (ORL) on a per ATM-port basis

Output Rate Limiting (ORL) on a per-Physical Ethernet Interface basis

3.5 ADSL2/2+ IP DSLAM Specifications

System Architecture ADSL/ADSL2/ADSL2+ Interface

48/24 ports ADSL/ADSL2/ADS2+/SHDSL

subscriber interface with built-in POTS

Splitter

One 1000BaseT MGNT+ Two 1000BaseT

or one Giga LX Uplink/Subtend Interface

(module selectable)

Subtending capability allows up to 8 units

to be cascaded and managed as one unit

Telco-50 pin Centronic connector for

ADSL+POTS IN and POTS OUT

Downstream DMT data rate from 32

kb/s up to 25 Mb/s; Upstream DMT

data rate from 32 kb/s to 1 Mb/s

Comply with ITU G.992.1 (G.DMT),;

G.DMT.bis; ITU G.992.2 (G.Lite);

ANSI T1.413 issue 2; ITU G.994.1

(G.handshake)

for ADSL, G.992.3 for

ADSL2, and G.992.5 for ADSL2+

Extended power management

capabilities to optimize power

consumption for each application

Maximum reach exceeding

20Kft(6.1Km)

Protocol Handling Capability Management

8 VCs per xDSL ports

128 MAC address per xDSL ports

64*128 MAC address

2K Multicast MAC address

512 VLAN(any value in 4096) support

Configurable packet size (64 to 1542)

Microsoft NT/SNMP-based GUI

EMS

Local RS-232 CLI, and Ethernet

SNMP/TELNET management

Remote in-band SNMP/TELNET

management

Firmware upload/download via FTP

or TFTP

SNMP v1, v2c, v3

LAN Side (Uplink or Extension Side)

1* 1000BaseT-MGNT + 2*1000BaseT

1*1000BaseT-MGNT+1*1000BaseT+

1*1000Fx(SX/LX/LH/ZX)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 602 603

Comments to this Manuals

No comments