APC IP DSLAM User's Guide download pdf (Page 247)

100

101

239

---------------------

[ 0] 16

Signal Atn(dB/10) : 40

GsParametricTestResult : Ok

Parametric Info

--------------------

Bin Number Number of bits/bin

-------------------------------------

Output Fields

FIELD Description

Ifname

The ADSL ATUC physical interface name.

Serial Number

The vendor specific string that identifies the

vendor equipment.

Vendor ID

Vendor ID Code.

Version Number

The vendor specific version number sent by this

ATU as part of the initialization messages.

Curr Status

Indicates current state of the ATUC line. This is

a bit-map of possible conditions.

Curr Snr Margin(dB/10)

Noise Margin as seen by this ATU with respect

to its received signal in tenth dB.

Curr Atn(dB/10)

Measured difference in the total power

transmitted by the peer ATU and the total power

received by this ATU.

CurrAttainable

Rate(bps)

Indicates the maximum currently attainable data

rate by the ATU. This value will be equal to, or

greater than the current line rate.

Curr Output Pwr(dB/10)

Measured total output power transmitted by this

ATU.This is the measurement that was reported

during the last activation sequence.

GsOpState

Operational state of the Xcvr.

GsActualStandard

Actual standard used for connection, based on

the outcome of the negotiation with the Remote

Unit.

GsTxAtmCellCounter

Provides Tx ATM cell counter.

GsRxAtmCellCounter

Provides Rx ATM cell counter.

GsStartProgress

Defines the current detailed start up state of

Xcvr. 0x0ñ startup not in progress; 0x0 ñ

0x0FFF Handshake/Training/ Profile

Management/ Fast Retrain inprogress; 0x8000 ñ

0x8FFF DSP firmware DownLoad in progress;

0xF000 ñ 0xFFFF illegal Parameter

GsIdleBertError

Number of bit errors.

GsIdleBertCells

Number of idle cells.

GsBertSync

Indicates whether the Signal is in Sync or not.

GsBertError

Provides the number of bit errors detected

during BERT.

Data Boost Status

Conexant parameter that indicates whether

DataBoost is utilized for the connection.

Chan Perf CD

The near-end delineated total cell count

performance parameter is a count of the total

number of cells passed through the cell

delineation and HEC function process, operating

on the ATM Data Path, while in the SYNC state.

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 247

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM