APC IP DSLAM User's Guide Page 173

  • Download
  • Add to my manuals
  • Print
  • Page
    / 603
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 172
165
System ID.
Partner Oper Port Priority
The current operational value of the port
priority for the protocol Partner.
Actor System ID
A 6-octet, read-write MAC address value,
used as a unique identifier for the System that
contains this Aggregator.
Partner Admin Sys
Priority
A 2-octet, read-only value that indicates the
priority value associated with the Partner's
System ID.
Actor Port
The port number locally assigned to the
Aggregation Port.
Partner Oper Sys Priority
A 2-octet read-only value that indicates the
priority value associated with the PartnerÌs
System ID.
Partner Admin Sys Id
A 6-octet read-write MACAddress value
representing the administrative value of the
Aggregation Port’s protocol Partner's System
ID.
Partner Admin Port
The current administrative value of the port
number for the protocol Partner.
Partner Oper Sys Id
A 6-octet read-write MACAddress value
representing the operational value of the
Aggregation Port’s protocol Partner's System
ID.
Partner Oper Port
The current operational value of the port
number for the protocol Partner.
Port Actor Admin State
Administrative state of Actor.
Port Partner Admin State
Administrative state of Partner.
Port Actor Oper State
Operational state of Actor.
Port Partner Oper State
Operational state of Partner.
Attached Agg ID
The identifier value of the Aggregator that this
Aggregation Port has currently selected.
Selected Agg ID
The identifier value of the Aggregator that this
Aggregation Port has currently selected.
Aggregation Status
Whether or not aggregation(bonding) is to be
enabled over this Aggregation Port..
LACP PacketsPrio
For LACP PDUs, this priority shall be used for
choice of traffic class/Queue on outgoing
interface.
References
lacp aggrport list
lacp aggrport stats
8.4.5 LACP AGGRPort List Command
8.4.5.1 Get lacp aggrport list
Description: Use this command to get a LACP aggregator port list.
Command Syntax: get lacp aggrport list [aggrifname <aggrifname-
val>]
Parameters:
Name Description
Aggrifname
<aggrifname-val>
The Aggregator interface name.
Type : Optional
Page view 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 602 603

Comments to this Manuals

No comments