517
8.25 System Commands
8.25.1 Cbuftrace cfg Commands
8.25.1.1 Get cbuftrace cfg
Description: Use this command to get.
Command Syntax: get cbuftrace cfg [module <module-val>]
8.25.1.2 Reset cbuftrace cfg
Description: Use this command to reset.
Command Syntax: reset cbuftrace cfg module <module-val>
Parameters
Name
Description
module <module-val>
This specifies the module, for which c-buftrace
configuration is to be modified
Type: Reset -- Mandatory
Get -- Optional
Example
$ get cbuftrace cfg module GAG
Output
module : GAG
flow : 3 level : 0xff
Output field
Field Description
module
This specifies the module, for which c-buftrace
configuration is to be modified
flow
This indicates a Hexadecimal bitmask, which
sets the filter for c-buftrace flow.
level
This indicates a Hexadecimal bitmask, which
sets the filter for c-buftrace level.
8.25.2 System Configuration Save and Restore Commands
8.25.2.1 Commit
Description: Use this command to commit the active configuration to
the flash. This command is not supported
Command Syntax: commit [nbsize]
Parameters:
None
Example
$ commit
Output
Set Done
Caution
This command will take some time to execute.
Comments to this Manuals