APC AP7602 Instruction Manual download pdf (Page 181)

Mass Configuration: Device Settings

180 InfraStruXure Central 4.0 User’s Reference

To add a supplemental OID:

1. Click Add. The Add Supplemental OID window opens.

2. Select from the Sensor type drop box the type of sensor (temperature, humidity, air flow, and so on)

that best matches the data that will be reported by the supplemental OID.

3. Select form the Unit of measure drop box the appropriate unit or measurement (degrees, seconds,

volts, and so on) that will be used when reporting sensor data from the supplemental OID.

4. Type in the OID field the OID that you want to monitor on the selected SNMP target (for example,

"1.3.6.1.4.1.318.1.1.1.2.2.2").

5. Type in the Description field a description of the OID (for example, "UPS Temperature").

6. Click OK to save the supplemntal OID.

Once the supplemental OID has been added, it will automatically be detected on any SNMP target to

which it applies, and you can easily monitor and receive alert notifications for it just like any other

monitored value on a pod or SNMP target. To configure thresholds on values reported by a supplemental

OID you must select the device to which the supplemental OID was added and then use either the Other

Numeric Sensors or Other State Sensors task (depending on the nature of the data that is provided by the

supplemental OID) to define thresholds for the sensor.

DNS

Use the DNS task to view or change the domain name server settings used by selected devices. To use the

DNS task:

1. Launch the DNS task. In addition to the IP address/hostname and status of each selected device, the

DNS task's device selection window also includes two task-specific information columns:

– DNS Domain: Specifies the DNS domain name to which this device belongs.

– Primary DNS Server: Specifies the IP address of the primary domain name server.

2. To continue, select one or more devices from the device selection window and click Edit.

3. The DNS Settings window opens. This window contains the following fields:

Field Description

DNS domain The DNS domain name to which this device belongs.

Primary DNS server The IP address of the primary domain name server.

Secondary DNS server The IP address of the secondary domain name server.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 293 294

No comments

APC AP7602 Instruction Manual Page 181