APC AP7602 Instruction Manual download pdf (Page 91)

Server Administration Tasks

90 InfraStruXure Central 4.0 User’s Reference

To set the Post Only Camera Settings, select the radio button that corresponds to the frequency with

which management devices in Post Only mode should send camera images. The available settings are:

• Send camera images whenever posting to InfraStruXure Central: Images are posted every time

InfraStruXure Central communicates with the device. This is the default setting.

• Never send camera images when posting to InfraStruXure Central: Images are never posted to

InfraStruXure Central.

• Send camera images when posting to InfraStruXure Central using the following interval: Images are

posted to InfraStruXure Central at the specified interval. For example, if you set this value to 3 then

images are posted during one communication, and are not posted again until 3 successive

communications between the device and InfraStruXure Central have occurred.

When you have finished selecting a Post Only Camera Setting click Apply to save your settings.

Management Device Security Settings

Use the Management Device Security Settings task to specify the user names and passwords that

InfraStruXure Central will use to monitor and manage your devices. By default, InfraStruXure Central

will attempt to use the default supervisor (administrator) user name and password (netbotz/netbotz) to

access and manage devices when performing configuration tasks. If you have changed the administrator

password on your devices, you must use the Management Device Security Settings task to specify the

user name and password that will enable InfraStruXure Central to access your devices.

To edit previously defined device security settings, or to configure new security settings:

1. Click Create (or, select a previously defined setting from the table and then click Edit).

2. The Create Security Entry window opens (or, if you are editing a previously defined user group, the

Note

If InfraStruXure Central is not configured to have administrator-level access to

your devices you will not be able to perform configuration tasks on the devices.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 293 294

No comments

APC AP7602 Instruction Manual Page 91