APC MGE 6739380EN/JC User Manual download pdf (Page 46)

Page 46 - 6739380EN/JC

Display system configuration

This function may be accessed from the initial

screen. Press the "*" button, followed by the "V"

button in less than one second.

Enter the password (a combination of four

buttons among the control panel buttons). If the

password is incorrect, the system displays the

following screen for a few seconds:

then automatically returns to the initial screen.

Selection of the type of display: local ("Monitor")

or distant ("Tele Monitor"). If the display is

distant, the local buzzer is deactivated.

Selection of display role on the network: master

(only one display may be the master) or slave.

Selection of the slave display number (multi-

display installation) from 1 to 10.

Selection of the numbers of the cubicles that the

display must control. Ten cubicle numbers are

successively presented. Select "yes" if the

display is to control the cubicle or "no" if it does

not control the cubicle or if the cubicle does not

exist. Confirm using the "*" button. The system

goes on to the next cubicle number. Following

confirmation of the last cubicle number, the

system automatically returns to the initial

screen.

Selection of the numbers of the slave displays

controlled by the master display. Ten display

number are successively presented. Select

"yes" if the master display is to control the slave

display or "no" if it does not control the display

or if the display does not exist. Confirm using

the "*" button. The system goes on to the next

display.

Selection of the numbers of the cubicles

controlled by the display. Eight cubicle number

are successively presented. Select "yes" if the

display is to control the cubicle or "no" if it does

not control the cubicle or if the cubicle does not

exist. Confirm using the "*" button. The system

goes on the next screen.

Confirmation as to whether the installation is

equipped with a giant screen. Following

confirmation using the "*" button, the system

automatically returns to the initial screen.

INCORRECT

PASSWORD

This function may be accessed from

the initial screen. Press the "*" button,

followed by the "V" button in less than

one second.

Note:

◗ ensure that two "Monitor" or "Tele

Monitor" units do not receive the same

number;

◗ only one master "Tele Monitor" may

be installed on the display network;

◗ this function may be accessed only

with a password.

PASSWORD ?

DISPLAY = MASTER

>=SELECT =CONFIRM.

DISPLAY NUMBER =

>=SELECT =CONFIRM.

CUBICLE N° = YES

>=SELECT =CONFIRM.

initial screen

if display

is master

initial screen

DISPLAY N° = YES

>=SELECT =CONFIRM.

CUBICLE N° = YES

>=SELECT =CONFIRM.

GIANT DISPLAY =YES

>=SELECT =CONFIRM.

initial screen

if display

is slave

DISPLAY = LOCAL

>=SELECT =CONFIRM.

"Monitor" alphanumeric display (cont.)

1 2 ... 41 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments

APC MGE 6739380EN/JC User Manual Page 46

Comments to this Manuals

Related products and manuals for Uninterruptible power supplies (UPSs) APC MGE 6739380EN/JC