APC IP DSLAM User's Guide download pdf (Page 202)

194

addresses, which can be learnt from this port.

This is modifiable when the admin status of

bridge port is disabled. Max of number of

unicast entries that can be learnt/configured on

a birdge port on CPE side is 4096. The default

value for number of unicast entries that can be

learnt or configured on a CPE side bridge port

is 4096. Max of number of unicast entries that

can be learnt/configured on a birdge port on

NET side is 4096. The default value for

number of unicast entries that can be learnt or

configured on a bridge port is 4096. Max of

number of unicast entries that can be

learnt/configured on a birdge port on downlink

side is 256. The default value for number of

unicast entries that can be learnt or configured

on a bridge port is 256. This field is unused if

the bridge port is created over an

PPPOE/IPOE interface or PPPOE/ IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

interface.

Learning Status

The State of Learning on this bridge port. The

value enable (1) indicates that unicast Mac

address learning is enabled and the value

disable indicates that unicast Mac address

learning is disabled on this bridge port. The

default value of learning status for

CPE/Downlink side bridge ports shall be

enable and for NET side bridge port default

value shall be disable. This field is unused if

the bridge port is created over an

PPPOE/IPOE interface or PPPOE/IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

interface.

Port Oper Status

The current operational state of the bridge

port. If AdminStatus of the bridge port is

disable (2), then OperStatus of the port should

be disable (2). If AdminStatus of the bridge

port is changed to enable(1), then OperStatus

of the port should change to enable(1) if the

bridge port is ready to transmit and receive

network traffic. The bridge port will have the

OperStatus value as dormant (5) if the

'configstatus' of the bridge port is 'config' and it

is waiting for a packet to be sensed, on its

lower interface index, to get activated.

Port Admin Status

The desired state of the bridge port. On

creation the bridge port shall be created in

enabled AdminStatus by default.

Sticky Status

Indicates if the port has been set as sticky. The

value enable(1) indicates that the entries learnt

on this port won't be aged out. It also indicates

that the entries learnt on this port shall not be

learnt on any other port. The entries learnt on

this port can only be removed by management

action or by making the value as disable (2) so

that the entries can be aged out. This field is

unused if the bridge port is created over an

PPPOE/ IPOE interface or PPPOE/IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

interface.

FDB Modify

This specifies whether this port can overwrite

an existing forwarding database entry. This

field is unused if the bridge port is created over

an PPPOE/ IPOE interface or PPPOE/IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 602 603

Comments to this Manuals

No comments