APC IP DSLAM User's Guide download pdf (Page 220)

100

101

212

Field Description

Vlan Index

The VLAN id for this VLAN. In devices

supporting "Shared Vlan for multicast" capability,

the information for a multicast MAC address is

shared across vlans. Hence vlan id is an

optional parameter. In devices supporting

"Independent Vlan for multicast" capability, each

vlan can have its own information for a multicast

MAC address. Hence vlanid is a mandatory

parameter in all the commands other than - get.

For No Vlan case, vlan id is not required. VLAN

here means the 802.1q Vlan in case of Native

Vlan mode and Virtual Vlan in case of Stacked

Vlan Mode.

Forward All Ports

The complete set of ports in this VLAN, to which

all multicast group-addressed frames are to be

forwarded. This includes ports for which this

need has been determined dynamically by

GMRP, or configured statically by management.

Forward All Static Ports

The set of ports, configured by management in

this VLAN, to which all multicast group-

addressed frames are to be forwarded. More

than one value can be given, separated by

spaces.

Forward All Forbidden

Ports

The set of ports configured by management in

this VLAN, for which the Service Requirement

attribute Forward All Multicast Groups, may not

be dynamically registered by GMRP. More than

one value can be given, separated by spaces.

Cautions

• An entry in this table shall not be applicable for a bridge port created

over PPPOE/IPOE interface.

References

• bridge static multicast

8.7.2 Bridge mcast forwarding Commands

8.7.2.1 Get bridge mcast forwarding

Description: Use this command to get.

Command Syntax: get bridge mcast forwarding [vlanid <vlanid-val>]

[macaddr <macaddr-val>]

Parameters

Name Description

vlanid <vlanid-val>

The VLAN id for this VLAN. In devices supporting

"Shared Vlan for multicast" capability, the

information for a multicast MAC address is shared

across VLANS. Hence, vlanid is not required and

is passed as zero. In devices supporting

"Independent Vlan for multicast" capability. Each

vlan can have its own information for a multicast

MAC address. Hence, VLAN id is a mandatory

parameter and a valid value of vlanid must be

passed. For No Vlan case VLAN id is not required.

When Vlan transparency feature is supported, the

valid range for vlanid also includes 4097. In case

of "Shared Vlan Multicast also there shall always

be a seperate entry for 4097 if the VLAN with that

VLAN Id is created. VLAN here means the 802.1q

Vlan in case of Native Vlan mode and Virtual Vlan

in case of Stacked Vlan Mode.

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 220

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM