APC IP DSLAM User's Guide download pdf (Page 257)

249

FIELD Description

Ifname

The IfIndex of DSL port

IntervalNumber

Count from 1 through 96 of 15 minute intervals.

Performance Data Interval number 1 is the most

recent previous interval; interval 96 is 24 hours

ago.

IntervalValidData

This variable indicates if the data for this interval is

valid.

IntervalLofs(sec)

Count of seconds in the interval when there was

Loss of Framing.

IntervalLoss(sec)

Count of seconds in the interval when there was

Loss of Signal.

IntervalLprs(sec)

Count of seconds in the interval when there was

Loss of Power.

IntervalESs(sec)

Count of Errored Seconds in the interval. The

errored second parameter is a count of one-

second intervals containing one or more crc

anomalies, or one or more los or sef defects.

8.9.15 Adsl atur intervalext Commands

8.9.15.1 Get adsl atur intervalext

Description: This command is used to get.

Command Syntax: get adsl atur intervalext [ifname <interface-

name>] [nintrvl <nintrvl-val>]

Parameters

Name Description

ifname <interface-

name>

The ADSL interface name.

Type : Get – Mandator

Valid values: dsl-0 – dsl-23

nintrvl <nintrvl-val>

Count from 1 through 96, of 15 minute intervals.

Type: Get -- Mandatory

Valid values: 1 - 96

Example

$ get adsl atur intervalext IFNAME dsl-0 NINTRVL 1

Output

Ifname : dsl-0

IntervalNumber : 1

IntervalSesl(sec) : 10 IntervalUasL(sec) : 10

IntervalFecsL(sec) : 10

Output Fields

FIELD Description

Ifname

The ADSL interface name.

IntervalNumber

Count from 1 through 96, of 15 minute intervals.

IntervalSesl(sec)

Count of seconds in the interval when there was

severely errored seconds.

IntervalUasL(sec)

Count of seconds in the interval when there was

unavailable errored seconds.

IntervalFecsL(sec)

Count of seconds in the interval when there was

Forward error correction seconds.

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 602 603

Comments to this Manuals

No comments