APC IP DSLAM User's Guide Page 430

  • Download
  • Add to my manuals
  • Print
  • Page
    / 603
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 429
422
mcastvlanctag
<mcastvlanctag-val> |
invlan | none
This parameter specifies the Multicast CVlanId to
be used. Two special values of this parameter
are supported in stacked mode: One value
(4097) to signify that repot/leave shall be
forwarded to querier with the C tag with which it
was received from the subscriber port and the S
tag specified in multicast Vlan's definition One
value (0) to signify that report/leave shall be
forwarded to querier with S tag specified in
multicast Vlan's definition and no C tag. Other
Value shall signify that, report/leave shall be
forwarded to querier with S and C tag specified in
multicast Vlan's definition.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 -4095
Additional Values: 0, 4097
portlist <portlist-val> |
none
This parameter specifies the list of ports on which
a given combination of (Group Address, Source
Address, VlanId) maps to a specified multicast
vlan (STag, CTag)
Type: Create -- Optional
Modify -- Optional
Default value: 0
Example
$ create igmpsnoop mvlan config grpipaddr 224.0.0.7 srcipaddr
12.23.34.45 vlanid 6 mcastvlanstag 5 mcastvlanctag 5 portlist 5 6 10
Output
Verbose Mode On
Entry Created
Grp IPAddress : 224.0.0.7
Src IPAddres : 12.23.34.45
VLAN Index : 6
McastVlan STag : 5 McastVlan CTag : 5
PortList : 5 6 10
Verbose Mode Off:
Entry Created
Output field
Field Description
Grp IPAddress
This parameter specifies the Destination Group
IP address for a multicast stream. The source
address and destination group address together
define a multicast stream. In case of value 0, this
parameter is ignored while determining Multicast
Vlan
Src IPAddres
This parameter specifies the source IP address
of the Multicast Server. The source address and
destination group address together define a
multicast stream. In case of value 0, this
parameter is ignored while determining Multicast
Vlan.
VLAN Index
This parameter specifies the Dot1q tag of an
IGMP packet received. This will be PVID in case
an untagged IGMP packet was received. In case
Page view 429
1 2 ... 425 426 427 428 429 430 431 432 433 434 435 ... 602 603

Comments to this Manuals

No comments