475
Port No
This field specifies Atm Port number.Its value is
considered only when the bitmask for portid is
set in ConfigSubOptionBitmask
VCI
VCI Identifier of the AAL5 VC corresponding the
bridge port for this instance is created
VPI
VPI Identifier of the AAL5 VC corresponding the
bridge port for this instance is created
L2 type
This Parameter specifies the L2 type used
Encap Type
This Parameter specifies the encapsulation type
of the aal5 VC corresponding the bridge port for
which this instance is created
References
• PPPoE Intermediate Agent commands
8.20.7 Pia stats entry Commands
8.20.7.1 Get pia stats entry
Description: Use this command to get.
Command Syntax: get pia stats entry [portid <portid-val>] [vlan
<vlan-val>]
8.20.7.2 Reset pia stats entry
Description: Use this command to reset.
Command Syntax: reset pia stats entry portid <portid-val> vlan
<vlan-val>
Parameters
Name Description
portid <portid-val>
Bridge port Identifier
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 194
vlan <vlan-val>
VLAN identifier. In case of stacked mode this is
virtual VLAN
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 4095
Additional Values: 4097
Example
$ get pia stats entry portid 1 vlan 1
Output
Port Id : 1 VLAN : 1
Padi Received : 10 Padi Discarded : 4354
Padr Received : 4354 Padr Discarded : 4354
Output field
Field Description
Port Id
Bridge port Identifier
Comments to this Manuals