APC IP DSLAM User's Guide download pdf (Page 555)

100

101

547

trapparameter is the interface name.I

POA Interface Down: This trap indicates that the

IPOA interface is operationally down. The

trapparameter is the interface name.

IPOE Interface Up: This trap indicates that

thePPPR interface is operationally up. The

trapparameter is the interface name.

IPOE Interface Down: This trap indicates that the

IPOE interface is operationally down. The

trapparameter is the interface name.

ABOND Interface Up: This trap indicates that the

ABOND interface is operationally up. The

trapparameter is the interface name.

ABOND Interface Down: This trap indicates that

the ABOND interface is operationally up. The

trapparameter is the interface name.

VCAGGR Interface Up: This trap indicates that

the VCAGGR interface is operationally up. The

trapparameter is the interface name.

VCAGGR Interface Down: This trap indicates

that the VCAGGR interface is operationally up.

The trap parameter is the interface name.

SHDSL Loop Attenuation crossing: This trap

indicates that the SHDSL loop attenuation is

crossing.

SHDSL SNR crossing: This trap indicates that

the SHDSL loop attenuation is crossing.

SHDSL Errored Seconds 15-Minute Threshold

hit : This trap indicates that 15-Minute interval

threshold for SHDSL Errored Seconds has

reached.

SHDSL Severely Errored Seconds 15-Minute

Threshold hit : This trap indicates that 15- minute

interval threshold for ATUC Severely Errored

Seconds has reached.

SHDSL CRC Anomalies 15-Minute Threshold

hit: This notification indicates that the CRC

anomalies threshold (as set in SHDL End point

alarm conf profile table) has been

reached/exceeded for the SHDSL segment

endpoint. Reached/exceeded is determined by

comparing the endpoint's CRC anomalies in the

current 15-minute interval (as set in SHDSL End

Point Curr Table) with the specified threshold.

SHDSL Loss of Sync Word Seconds 15-Minute

Threshold hit: This notification indicates that the

Loss of Sync Word (LOSW) seconds threshold (as

set in SHDL End point alarm conf profile table)

has been reached/exceeded for the SHDSL

segment endpoint. Reached/exceeded is

determined by comparing the endpoint's LOSW

seconds in the current 15-minute interval (as set in

SHDSL End Point Curr Table) with the specified

threshold.

SHDSL Unavailable Seconds 15-Minute

Threshold hit: This trap indicates that 15-

minuteinterval threshold for SHDSL Unavailable

Secondshas reached.

SHDSL Invalid number of Repeaters detected:

This trap indicates the number of Invalid repeaters

1 2 ... 550 551 552 553 554 555 556 557 558 559 560 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 555

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM