APC IP DSLAM User's Guide download pdf (Page 565)

557

Command Syntax: modify gvrp port info portid <portid-val >

[ portvlanid <portvlanid-val > ] [ acceptframetypes all | tagged ]

[ ingressfiltering true|false ] [ gvrpstatus enable | disable ]

[ restrictedvlanreg true|false ][pktpriority <pktpriority-val> ] [psvlanid

<psvlanid-val> | none] [ppstatus enable | disable] [ctosprofileid

<ctosprofileid-val> | none]

Parameter

Name Description

portid <portid-val>

The bridge port id.

Type: Modify － Mandatory

Get － Optional

Valid values: 1 - 578

portvlanid <portvlanid-

val>

The VLAN Identifier.

Type: Modify － Optional

Valid values: 1 - 4095

acceptframetypes all

|tagged

When this is Tagged, the device will discard

untagged frames or Priority-Tagged frames

received on this port. When All, untagged frames

or Priority-Tagged frames received on this port will

be accepted and assigned to the PVID for this

port.

Type: Modify － Optional

ingressfiltering False

|True

When this is true, the device will discard incoming

frames for VLANs, which do not include this Port

in its Member set. When false, the port will accept

all incoming frames.

Type: Modify － Optional

Valid values: False, True

gvrpstatus enable

|disable

The state of GVRP operation on this port. The

value 'enable', indicates that GVRP is enabled on

this port, as long as 'gvrpstatus' in 'GVRP INFO'

command is also enabled for this device. When

this is 'disable', even if 'gvrpstatus' in 'GVRP INFO'

command is 'enable' for the device, GVRP will be

'disable' on this port. In such a case, any GVRP

packets received will be silently discarded and no

GVRP registrations will be propagated from other

ports. This object affects all GVRP Applicant and

Registrar state machines on this port. This

configuration shall not be effective for a bridge

port created over PPPOE/IPOE interface.

Type: Modify － Optional

restrictedvlanreg

False |True

The state of Restricted VLAN Registration on this

port. If the value of this control is true(1), then

creation of a new dynamic VLAN entry is

permitted only if there is a Static VLAN

Registration Entry for the VLAN concerned, in

which, the Registrar Administrative Control value

for this port is, Normal Registration. Type: Modify

－ Optional

Valid values: False, True

pktpriority <pktpriority-

val>

For the GVRP PDUs generated by the Control

Plane, this priority shall be used for choice of

traffic class/ Queue on outgoing interface. In case

the bridge port is over an Aggregated ATM VC,

this will also be used to identify the VC, on which

the packet is to be sent.

Type: Modify － Optional

Valid values: 0 - 7

psvlanid <psvlanid-

val> | none

Port service Vlan Index, the Service VLAN ID

assigned to frames received on this port. This is

applicable only to Non-Provider ports. The value

zero here means that this field is not applicable.

psvlanid and ctosprofileid both can be non-zero.

But they both can not be zero. In case of bridge

port on PPPoE and IPoE interfaces psvlanid value

1 2 ... 560 561 562 563 564 565 566 567 568 569 570 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 565

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM