APC IP DSLAM User's Guide download pdf (Page 336)

100

101

328

priority <priority-val>

This parameter specifies the priority to be set in

Tagged Ethernet PDUs sent on Management

VLAN over this interface. This field is valid only if

either 'ip' field is non-zero or 'usedhcp' field is

true. In Native-VLAN mode, this priority shall be

used for C-Vlan tag, while in stacked-VLAN

mode it shall be used for S-Vlan tag.

Type: Create - optional

Modify - optional

Valid values: 0 -7

trfclassprofileid

This parameter specifies the traffic class profile

identifier to be associated with the Ethernet

interface.

Type: Optional

Valid values:1 to 10

Default Value: 1

Ctlpktinstid

This specifies the control packet instance

identifier associated with this interface. If the

user does not provide any instance identifier

while creating an interface, an instance is

created internally from the default profile

governed by the macro 2 and associated to the

interface. This will reduce the total number to

instances that can be now created by one. The

default instance is governed by the macro 0.

TYPE: Create -- Optional

Valid Values:1 - 26

Default Value: 0

ctlpktgroupid

<ctlpktgroupid-val> |

none

This parameter specifies the Control packet

instance group associated with this Ethernet

interface. The flows for this interface shall be

mapped to control packet instances as mapped

for the flows corresponding to the groupid

configured in ctlpkt group info command. If this

group does not have entries for all of the flows,

then those flows shall be mapped to the

ctlpktinstid. If groupid is 0, then all the flows shall

be mapped to ctlpktinstid.

Type: Create -- Optional

Valid values: 0 -50

Default value: 0

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 602 603

Comments to this Manuals

No comments

APC IP DSLAM User's Guide Page 336

Comments to this Manuals

Related products and manuals for Networking APC IP DSLAM