APC AP9212 Technical Information download pdf (Page 20)

Chapter 3:

How to Monitor a UPS

PowerNet MIB Reference Guide

[upsAdvIdent]

[upsBattery] UPS Battery OIDs

The [upsBattery] category has nine OIDs in two sub-categories, [upsBasicBattery] and

[upsAdvBattery] that provide UPS battery status information. Eight are read-only OIDs, and one OID

reports when the battery was replaced last, a value that you can define by using a SET.

You can access all nine OIDs through any Management Card or through a PowerNet Agent that

connects to the UPS through a smart-signalling cable. For a PowerNet Agent that connects to the UPS

through a simple-signalling cable, you can use only the three [upsBasicBattery] OIDs.

[upsBasicBattery]

OID Information Reported

upsAdvIdentFirmwareRevision The UPS firmware version.

upsAdvIdentDateOfManufacture The date on which the UPS completed the

manufacturing process.

upsAdvIdentSerialNumber The UPS serial number.

OID Information Reported

upsBasicBatteryStatus The current UPS battery status:

• unknown (1): The Management Card or PowerNet Agent

cannot report the status.

• batteryNormal (2): Within normal operating parameters.

• batteryLow (3): Insufficient battery capacity to support the

UPS equipment load.

upsBasicTimeOnBattery The amount of time since the UPS switched to battery power.

upsBasicBatteryLastReplaceDate The date on which the battery was last replaced, a value you can

change by using a SET. The format is mm/dd/yy or mm/dd/yyyy.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 94 95

No comments

APC AP9212 Technical Information Page 20