APC AP9212 Technical Information download pdf (Page 70)

Chapter 7:

[sPDUOutletStatusMSP] Outlet Status OIDs

PowerNet MIB Reference Guide

[sPDUOutletStatusMSP] Outlet Status OIDs

The [sPDUOutletStatusMSP] category has a tabled set of OIDS that provides information on the status of the outlets

for MasterSwitch Plus unit.

OID Information Provided

{sPDUOutletStatusMSPTable}

{sPDUOutletStatusMSPEntry}

sPDUOutletStatusMSPIndex

sPDUOutletStatusMSPName

sPDUOutletStatusMSPOutletIndex

sPDUOutletStatusMSPOutletName

sPDUOutletStatusMSPOutletState

sPDUOutletStatusMSPCommandPending

sPDUOutletStatusMSPOutletCtrlMode

View status information for a specified outlet. (The

sPDUMasterStatusMSPOutletCount OID identifies the number

of table entries.)

• The index to the MasterSwitch Plus unit’s entry (read only).

• The name of the MasterSwitch Plus unit (read only). (You use

the sPDUMasterConfigMSPName OID to define this name).

• The outlet number (read only)

• The name of the outlet (read only). (You use the

sPDUOutletConfigMSPallOutletName OID to define this

name).

• One of the following:

- outletStatusOnMSP (1) if the outlet is on

- outletStatusOffMSP (2) if the outlet is off

• One of the following:

- outletStatusMSPCommandPending (1) if a command is

pending on the outlet.

- outletStatusMSPNoCommandPending (2) if no command

is pending on the outlet.

• The control mode of the outlet, as defined by the OID

sPDUOutletConfigMSPallOutletCtrlMode:

- modeGracefulShutdown: (1): In Graceful Shutdown control

mode, the outlet turns off after a server supported by the UPS

has completed a graceful shutdown.

- modeAnnunciator (2): In Annunciator control mode, the

outlet turns off in response to an environmental alarm from an

Environmental Monitor and turns on when the cause is

resolved.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 94 95

Comments to this Manuals

No comments

APC AP9212 Technical Information Page 70

Comments to this Manuals

Related products and manuals for Network switches APC AP9212