APC AP9212 Technical Information download pdf (Page 71)

PowerNet MIB Reference Guide

Chapter 8: How to Manage an

Automatic Transfer Switch

This chapter describes how to use PowerNet MIB OIDs to manage (monitor, configure, control and test) an Automatic

Transfer Switch. The Automatic Transfer Switch also has an embedded Network Management Card. To manage that

management card, see Chapter 2, How to Manage Agents and Management Cards.

To list the seven categories of PowerNet MIB OIDs that you use to manage an Automatic Transfer Switch, perform the

following steps:

1. Select [products] under [apc].

2. Select [hardware].

3. Select [automaticTransferSwitch].

OID Categories Tasks

[atsIdent] Identify the Automatic Transfer Switch by its identification parameter values.

See [atsIdent] Identification OIDs.

[atsCalibration] View information about the Automatic Transfer Switch’s input and output lines,

their phases, and their calibration factors. See [atsCalibration] Calibration

OIDs.

[atsControl] Directly affect the overall operation of the Automatic Transfer Switch. See

[atsControl] Control OIDs.

[atsConfig] Modify parameters that affect the overall operation of the Automatic Transfer

Switch. See [atsConfig] Configuration OIDs.

[atsStatus] View the status of the Automatic Transfer Switch, and reset the recording of

minimum and maximum values that occurred for various operational

parameters. See [atsStatus] Status OIDs.

[atsStatusinput] View the status of the input feeds of the Automatic Transfer Switch and their

phases, including, for each phase, information on voltage, current, and power.

Also view or change the configured name for each input feed. See

[atsStatusInput] Input OIDs.

[atsStatusOuput] View the status of the output feeds of the Automatic Transfer Switch and their

phases, including, for each phase, information on voltage, current, power, load,

and percentage of load capacity being used. See [atsStatusOutput] Output

OIDs.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 94 95

No comments

APC AP9212 Technical Information Page 71