APC AP9212 Technical Information download pdf (Page 60)

Chapter 7:

[sPDUMasterControlMSP] Master Control OIDs

PowerNet MIB Reference Guide

[sPDUMasterControlMSP] Master Control OIDs

The [sPDUMasterControlMSP] category has a read-only OID and a tabled set of OIDS that provide information on the

MasterSwitch Plus unit and commands to control it.

OID Task

sPDUMasterControlMSPTableSize The number of MasterSwitch Plus units.

{sPDUMasterControlMSPTable}

{sPDUMasterControlMSPEntry}

sPDUMasterControlMSPIndex

sPDUMasterControlMSPName

sPDUMasterControlMSPCommand

View and control a specified MasterSwitch Plus unit.

• The index to the MasterSwitch Plus unit’s entry (read only).

• The name of the MasterSwitch Plus unit (read only) (You use the

sPDUMasterConfigMSPName OID to define this name).

• Affect the current outlet state.

- noCommandAllMSP (1): The value returned by an SNMP GET of

this OID.

- immediateAllOnMSP (2): Turn on all outlets immediately.

- sequencedAllOnMSP (3): Turn on all outlets as defined by the

sPDUOutletConfigMSPgsPowerOnDelay OID for each outlet.

- immediateAllOffMSP (4): Turn off all outlets immediately.

- gracefulAllRebootMSP (5): After the device running PowerChute

plus confirms shutdown, reboot all outlets as defined by the time

value of the sPDUOutletConfigMSPgsRebootDuration OID for

each outlet.

- immediateAllRebootMSP (6): Reboot all outlets immediately.

- gracefulAllShutdownMSP (7): After the device running

PowerChute plus confirms shutdown, shut down all outlets as defined

by the time value of the sPDUOutletConfigMSPgsPowerOffDelay

OID for each outlet. Turn each outlet back on after waiting for two

consecutive delay periods:

• The time defined by the value of the OID

sPDUOutletConfigMSPgsRestartDelay for the

outlet

• The time defined by the value of the OID

sPDUOutletConfigMSPgsPowerOnDelay for the

outlet.

- overrideAllBatCapThreshMSP (8): Ignore the battery capacity

threshold, and turn on each outlet after the delay defined by the

sPDUOutletConfigMSPgsPowerOnDelay OID for that outlet.

- cancelAllPendingCommandsMSP (9): Cancel all pending

commands on the MasterSwitch Plus unit.

- restoreFactoryDefaultsMSP (10): Reset the settings for the

MasterSwitch Plus unit to the defaults originally set at the factory.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 94 95

Comments to this Manuals

No comments

APC AP9212 Technical Information Page 60

Comments to this Manuals

Related products and manuals for Network switches APC AP9212